/ News


Riyadh Tank Insulation Company 0550879679

Tank insulation company in Riyadh There is a factor that should not be neglected but rather is a primary cause of water pollution, which is the raw material (tank insulation material - water tank insulation material) from which the tank is made and the method of manufacture itself. The ground tanks are made of concrete and are not isolated by the healthy and sound way that prevents water pollution but rather Tanks are isolated, so the best tank insulation company in Riyadh should be used. (Insulation of water tanks - Insulation of the upper water tank - Isolation of the ground water tank)) Only to ensure that water does not leak outside it without any consideration for the importance of human health. This may be the result of a desire to reduce costs or as a result of a lack of knowledge and experience of how to isolate water tanks or ways to isolate the correct water tanks, which are: A- Isolating concrete water tanks (concrete body) or so-called potominic rollers, which must be protected well, so as not to expose them to damage from the work that follows or from burial works. The importance of this insulation against groundwater (the method of isolating water tanks) is so that the water does not leak into the tank body or inside the tank itself. B- Insulating water tanks from the inside so that no chemical reaction occurs inside the tank with concrete and iron (isolating the ground tanks), and this uses materials that deal with concrete from cement or epoxy materials (steps to isolate the tanks). 2- The upper water tanks may be made of concrete, fiberglass or polyethylene, and we can determine the causes of water pollution in each case by identifying the components of each of them: A- Concerning the concrete tanks, they contain pores that lead to water pollution inside the tank with any fluids or materials outside the tank, if the upper water tanks are isolated in an accurate and quality manner completely global in order to prevent water pollution as the isolation of the ground water tanks occurs (how to isolate the tanks Overhead or ground scum), in addition to that the soft surface internal surface of the concrete tank causes an increase in algae growth in the event that the insulation does not work for a sufficiently smooth surface (tank insulation work) to prevent algae growth, and this is difficult to achieve in the case of the upper concrete tanks which The degree of exposure increases more Sun B- With regard to tanks made of fiberglass, which is a substance that can interact with water under the temperatures and environmental conditions that we have in the Kingdom of Saudi Arabia in general and which is difficult to control when storing water in the upper water tanks, in addition to that, the fiberglass does not It managed to reach a smooth internal surface of the tank and thus does not prevent the growth of algae as this substance cannot prevent sunlight (which contains infrared) from entering the tank water because it does not contain a black layer that can absorb the infrared. A- With regard to water tanks made of polyethylene, despite the fact that the material does not interact with water under natural conditions (which the International Food and Drug Authority recommended to store water and all food liquids in Polymers materials under which polyethylene is included), it is even possible that Achieving the largest possible benefit from the advantages of this material, the tank must be manufactured by relying on the molding technology, which enables the manufacture of the tank as a whole as one interlocking system in its parts and can be manufactured from several layers of suitable thicknesses to provide healthy and pure water and maintains the water temperature inside the tank without Affected by the external temperature, and this is what many manufacturers cannot provide for such tanks, either because they are not aware of the advantages of molding technology or desiring to reduce the cost of production to reduce the selling price to the consumer (tank insulation prices), which cannot perceive quality differences and distinguish them from one company to another. Waterproofing materials used by tank insulation companies in Riyadh: Water insulation is mainly used in all water installations to ensure the safety of the water quality and the conveying facility. The designations of the old insulation materials differed between bitumen and tar and asphalt. As for bitumen and tar, they are extracted from the oils of pine, rice or bitter trees. Asphalt is found in the form of lakes or surface pools in areas that contain oil reserves. Among the types of waterproofing materials used to isolate tanks in Riyadh: Of waterproofing materials: foil of various shapes and thicknesses, including asphalt, elastic, and non-woven fabric, to name a few. There are also some materials that are added to the internal or external concrete or clay that increase the impermeability. One of the most important types of waterproofing is all the protective coatings. The chips are made of non-woven fabric in the design of water protection of highways, railways, canals, stadiums, etc. Fiberglass and polyester films are a key element in protecting the final surfaces of residential buildings and buildings. And the epoxy material of all kinds is one of the most important materials used in protecting the internal surfaces of the pharmaceutical, food and chemical industries, because of its high chemical resistance and conforming to the health and environmental safety conditions. As for the soft flakes, they are mainly used in the implementation of waste basins, as well as for use in the aggregate dams and artificial lakes. Insulation is given a great deal of attention in coastal areas in particular, as the direct impact of salty water causes the rapid erosion of traditional building materials. The accessories of the insulation materials are no less important than the insulation materials themselves, and they consist of rubber materials, special pastes for expansion joints and adhesives to protect the types of thermal, sound and water insulation and foundation materials, in addition to the fixings of bolts, wedges and wraps
Visits : 1746
Comments : 0

Share :

Add New Comment

 Your Comment has been sent successfully. Thank you!   Refresh
Error: Please try again